Epson Aculaser C9200N - Page 242

EPSON AcuLaser C9200N Revision D
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 242
Confidential
3. Remove two Screws [5], and remove the Exit Sensor Holder [6].
4. Remove three Screws [7], and remove the Exit Tray [8].
[5]
[6]
[7]
[8]
Fusing Drive Assy
1. Remove three Screws [1] from rear side of the Main body and remove the Metal Blanking Plate [2].
C10 D10
[1]
[2]
[1]