Epson Aculaser C9200N - Page 243

EPSON AcuLaser C9200N Revision D
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 243
Confidential
2. Remove three Screws [3] from the rear side of the Main body.
3. Release the hook section of the Spring from the groove to the rear side from upper part of
Main Unit of the right rear side.
[3]
[4]
4. Remove the Fusing Drive Assy pushing upward [5] the connection part of the Transfer Belt
from the right Door side.
[5]