Epson Aculaser C9200N - Page 244

EPSON AcuLaser C9200N Revision D
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 244
Confidential
1st Image Transfer Pressure/Retraction Clutch (CL3)
1. Remove two Screws [1] from the Fusing Drive Assy and remove the Fusing Drive Motor
[2].
2. Remove the E-ring [3].
D11
[3]
[2]
[1]
3. Remove two Screws [4], three E-rings [5] and remove Install Board [6].
[6] [5]
[4]