Epson Aculaser C9200N - Page 257

EPSON AcuLaser C9200N Revision D
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 257
Confidential
4. Remove the Conductive Spring Assy [11] by removing two Hooks [10].
C H E C K
P O I N T
The upper Hook of Conductive Spring Assy is disabled downside with tweezers.
[11]
[10]
Before Releasing
After Releasing
[10]
[11]
C H E C K
P O I N T
5. Remove three Screws [12] and two E-rings [13] and then remove the Drive Cover [14].
6. Remove the Feed Clutch [16] by removing the Connector [15].
[16]
[15]
[14]
[12]
[12]
[13]