Epson Aculaser C9200N - Page 258

EPSON AcuLaser C9200N Revision D
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 258
Confidential
Be cautious following things when installing the Feed Clutch.
 Let the Cable into the Notch.
 Match the Rotation Stopper of the Clutch [17] with the Tab of the Main Unit [18]
surely.
[18]
[17]
1st Image Transfer Pressure/Retraction Position Sensor
(PC6)
1. Remove the 1st Image Transfer Pressure/Retraction Position Sensor Unit [3] by removing
the Screw [1] and Connector [2].
C7
[3]
[1]
[2]