Epson Aculaser C9200N - Page 327

EPSON AcuLaser C9200N Revision D
ADJUSTMENT Firmware Update 327
Confidential
UPDATE METHOD 4
 Required Tool
 USB memory stick
 Control Panel Special Operation
Required
Step Explanation Panel display
1 Print a status sheet, and check the current
version.
---
2 Turn the printer OFF. ---
3 Insert the USB memory stick stored the
firmware data file (RCX or EFU format) to
the USB host I/F of the printer.
 Store the only firmware data
file to update to the USB
memory.
 Store the firmware data to the
root directory of USB memory
stick.
---
4
Turn the product ON while holding down
the [Job Cancel] + [Up] buttons.
F/W Update Mode is started up.
---
5 Enter the password set in the [Password
Config Menu]. If the password is not set,
press the [OK] button.
The firmware data file in the USB memory is
searched.
6 Select [Update] and press the [OK] button.
7 After the confirmation screen is displayed,
select [Yes] and press the [OK] button.
Step Explanation Panel display
F/W Update Mode
Password
F/W Update Mode
Serching Files
Please Wait
F/W Update Mode
File
New Version
Old Version
Update
F/W Update Mode
File
New Version
Old Version
Update
Execute
Yes
No