Epson Aculaser C9200N - Page 328

EPSON AcuLaser C9200N Revision D
ADJUSTMENT Firmware Update 328
Confidential
8 Updating the firmware is executed.
Do not turn the printer OFF
during update. If aborted
abnormally, the printer may not
be booted.
9 When the update complete screen is
displayed, turn the printer OFF and ON to
reboot the printer.
10 Print a status sheet and confirm that the
program firmware version has been updated.
---
Step Explanation Panel display
F/W Update Mode
F/W Update : XX%
Don't power off
Please Wait
F/W Update Mode
F/W Update : XX%
Don't power off
Please Wait
F/W Update Completed
Restart a Printer