EPSON AcuLaser C9200N Revision D
OPERATING PRINCIPLES Operating Principle of Main Unit Mechanism 64
Confidential
2.2.10.2 Drive
Figure 2-45. Drive overview
2.2.10.3 Operation
TONER COLLECTING MECHANISM
Toner collected by the Cleaning Blade of the Transfer Belt and waste toner in
each of the Photoconductor Units are conveyed by the corresponding Toner
Collecting Screws to the Waste Toner Collector.
Figure 2-46. Toner collecting mechanism
WASTE TONER COLLECTOR SET DETECTION
The Waste Toner Full Detection Signal on the Water Toner Full Sensor
(PC8) detects Set/Unset of the Waste Toner Collector.
Set/Unset of the Waste Toner Collector is detected when the front door is
closed with the Main Power Switch being ON. The printing will stop when
the Waste Toner Collector is not set.
To Next Page
Loading...
