Side
Name Function
A
Air filter cover
open/close lever
Opens and closes the air filter cover.
B
Security cable
installation point
Pass a commercially available wire lock through here and
lock it in place.
s "Installing the wire lock" p.117
Name Function
C
Wireless LAN indicator
Indicates the access status to the supplied wireless LAN
unit.
D
Easy Interactive
Function receiver
Receives signals from the Easy Interactive Pen.
s "Interactive Function" p.62
E
Obstacle sensor
Detects obstacles that are interfering with the projection
area.
s "Cleaning the Obstacle Sensor" p.189
F
Remote receiver
Receives signals from the remote control.
G
Projection window
Projects images.
Warning
• Do not look into the projection window while
projecting.
• Do not place any objects or put your hand near
the projection window. It could cause burns,
fire, or the object to warp because this area rea‐
ches a high temperature due to the concentrated
projection light.
H
Security slot
The security slot is compatible with the Microsaver
Security System manufactured by Kensington.
s "Anti-Theft Lock" p.117
I
Air filter cover
Open when changing the air filter or operating the focus
lever.
J
Air intake vent
(air filter)
Takes in air to cool the projector internally.
s "Cleaning the Air Filter" p.190
s
"Replacing the Air Filter" p.194
K
Focus lever
Adjusts the image focus.
Open the air filter cover to operate.
Part Names and Functions
11
To Next Page
Loading...
