a
• The Pen Mode icon is displayed when Pen Mode Icon is set to
Right or Left.
s Extended - Display - Pen Mode Icon p.144
• When the source is Whiteboard, Video, USB1, or USB2, [
] and
[
] are not displayed.
• You can change PC Free Annotation and PC Interactive from the
Configuration menu.
s Extended - Easy Interactive Function - Pen Mode p.144
• Set Pen Operation Mode to Pen to enable the pen function in
Windows Vista/7. (This can only be set if Number of Pen Users is
set to One User)
Adjusting the Pen Operation Area
When using the interactive function by connecting to a computer, the pen
operation area is automatically adjusted if the resolution of the computer
changes. You do not need to perform pen alignment again.
a
You can turn this function On or Off in Auto Adjust Pen Area from
the configuration menu. The default setting is On.
s
Extended - Easy Interactive Function - Advanced p.144
If you notice the Easy Interactive Pen is out of position even when Auto
Adjust Pen Area is set to On, you can try Manual Adj. Pen Area.
s "Manual Adjust Pen Area" p.87
Manual Adjust Pen Area
a
Select Manual Adj. Pen Area for Easy Interactive Function from
the configuration menu.
a
• Adjust to fit the projected image within the screen.
• Display the computer's desktop screen so that you can check
the position of the mouse pointer easily.
b
Use the [ ] button on the remote control to select "Yes".
The mouse pointer moves towards the top left.
c
When the mouse pointer stops at the top left, touch the tip of the
mouse pointer with the Easy Interactive Pen.
The mouse pointer moves towards the bottom right.
Operating a Computer from the Projected Screen (PC Interactive)
87
To Next Page
Loading...
