Epson EB-1410Wi - Automatically Detect Input Signals and Change the Projected Image (Source Search)

Automatically Detect Input Signals and Change
the Projected Image (Source Search)
Press the [Source Search] button to project images from the port currently
receiving an image.
Using Remote Control Using the Control Panel
Using the Control Pad
The input source changes in the following order.
Video HDMI
DisplayPort
LAN USBDisplay
USB2
USB1
Computer
When two or more image sources are connected, press the [Source Search]
button until the target image is projected.
When your video equipment is connected, start playback before beginning
this operation.
a
If no image signal is being input, the following screen is displayed
when you press [Source Search] on the remote control or control
panel.
Change to Whiteboard when no image signal is being input.
Projecting images
47