b
Click [ ] on the bottom toolbar.
The Scan screen is displayed.
c
Make necessary settings on the Scan screen.
Click Advanced to open the detailed menu.
Item Explanation
Color
Select Color or Monochrome.
Orientation
Select the orientation for the scanned document.
ADF
Select the import device. For scanners that do not support ADF,
the document is scanned from the document table regardless of
this setting.
Scanner
Select the scanner you want to use.
d
Click [Scan].
The Scan screen is displayed.
e
After scanning, the image is pasted onto a new page in
Whiteboard Mode.
a
When using a scanner with a built-in ADF, up to 10 sheets can
be read. Repeat the procedure if you need to scan documents of
more than 10 sheets.
Opening files and reading into Whiteboard Mode
Press [ ] to open a file and read it into Whiteboard Mode. The opened
file is added as a new page.
The following types of file can be read into the Whiteboard Mode. Images
larger than a page are reduced to fit.
Type File Type (Ex‐
tension)
Notes
Image .jpg The following cannot be read.
• Images with a resolution greater than 2048 x 2048
• Files with the extension ".jpeg"
• CMYK color mode formats
• Progressive formats
.png Cannot read images with a resolution greater than
2048 x 2048.
PDF .pdf You can open PDF files for version 1.7 or earlier.
Set the number of pages when opening a PDF file. If
the file is password protected, enter the password.
Drawing
74
To Next Page
Loading...
