Epson EB-1410Wi - Adjusting the Image; Hue, Saturation, and Brightness Adjustment; Gamma Adjustment

• Press the [Volume] buttons on the remote control to adjust the volume.
[
a] Decreases the volume.
[
b
] Increases the volume.
Remote control
• Adjust the volume from the Configuration menu.
s Settings - Volume p.142
Caution
Do not start when the volume is set too high.
A sudden increase in volume may cause loss of hearing. Always lower the
volume before powering off, so that you can power on and then gradually
increase the volume.
Adjusting the Image
Hue, Saturation, and Brightness adjustment
The Hue, Saturation, and Brightness for each of the R (red), G (green), B
(blue), C (cyan), M (magenta) and Y (yellow) color components can be
adjusted.
Make settings from the configuration menu.
s Image - Advanced - RGBCMY p.139
Hue Adjusts the overall hue of the image, bluish - greenish - reddish.
Saturation Adjusts the overall vividness of the image.
Brightness Adjusts the overall color brightness of the image.
Gamma adjustment
Adjusts differences in the coloring for the projected image that occurs
depending on the connected device.
Make settings from the configuration menu.
s Image - Advanced - Gamma p.139
Adjusting Projected Images
57