Cannot operate as a mouse and draw by connecting to a computer
Check Remedy
Is Extended set correctly? Set the following to perform PC Interactive.
• Set Extended - USB Type B to Easy Interactive Function or USB Display/Easy Interactive Function from the
configuration menu.
When using USB Display, set USB Display/Easy Interactive Function.
• Set Pen Mode to PC Interactive from the Configuration menu.
s Extended - Easy Interactive Function p.144
The projector is not correctly connected to the computer. Check the USB cable connections. You may be able to resolve the problem by disconnecting and then reconnecting the
USB cable.
If you are using a notebook computer when the battery power is
running low, the USB port may stop working and you might not be
able to use USB devices.
Connect the computer to a power source.
Is Pen Operation Mode set to Pen?Set Pen Operation Mode to Mouse from the Configuration menu to perform PC Interactive.
s Extended - Easy Interactive Function - Pen Operation Mode p.144
The message "An error occurred in the Easy Interactive Function." is displayed
Check Remedy
An error has occurred in the interactive function. Contact the nearest address provided in the Epson Projector Contact List.
s Epson Projector Contact List
Computer's mouse does not work correctly
Check Remedy
Is the Easy Interactive Pen placed on the projection screen? Remove the Easy Interactive Pen from the projection screen, or turn it off.
Problem Solving
178
To Next Page
Loading...
