An error is displayed if Auto Calibration is not successful. Perform Manual
Calibration.
s "Manual Calibration" p.66
Manual Calibration
This function allows you to manually calibrate the pen.
a
Set Extended - Easy Interactive Function to Manual Calibration
from the configuration menu.
b
Adjust the focus by following the on-screen instructions.
c
Use the [ ] button on the remote control or control panel to
select "Yes".
d
A dot is displayed on the projected screen.
Touch the center of the dot with the tip of the Easy Interactive Pen.
The dot disappears and then appears at the next position.
Before Using the Interactive Function
66
To Next Page
Loading...
