Epson EB-1410Wi - Control Pad

Control Pad
Name Function
A
[t] button
Turns the projector power on or off.
s "From Installation to Projection" p.46
B
[Whiteboard] button
• Press this when the projector is off to turn on the
projector and start the interactive function in
Whiteboard Mode.
• Press this when the projector is on to change to
Whiteboard Mode. If you press it in Whiteboard Mode,
the image changes to the previous image source.
s "Drawing" p.69
Name Function
C
[Source Search]
button
Switches to the image from the input port where video
signals are being input.
s "Automatically Detect Input Signals and Change the
Projected Image (Source Search)" p.47
D
[Capture] button
Takes a snapshot of the projected screen. After taking the
snapshot, the image is pasted onto a new page in
Whiteboard Mode. (This button cannot be used in
Whiteboard Mode.)
s "Interactive Function" p.62
E
[Print] button
Prints the projected screen.
s "Using Drawing Content" p.80
F
[Save] button
Saves the projected screen.
s "Using Drawing Content" p.80
G
USB-B port (for
connecting a
computer)
Connects to a computer via a USB cable to use the
interactive function or USB Display.
s "Connecting to the Control Pad" p.41
H
USB-A port (for
connecting USB
storage)
Connects a USB storage device.
s "Connecting to the Control Pad" p.41
I
USB-A port (for
connecting a printer)
Connects to a printer via a USB cable.
s "Connecting to the Control Pad" p.41
J
USB-B port (for
connecting a
projector)
Connects to the projector via a USB cable when a USB
storage device or printer is connected to the Control Pad.
s "Connecting to the Control Pad" p.41
K
USB-A port (for
connecting a
projector)
Connects to a projector via a USB cable to use the
interactive function or USB Display.
s "Connecting to the Control Pad" p.41
Part Names and Functions
23