Correcting Keystone Distortion
You can correct keystone distortion using one of the following methods.
• H/V-Keystone
Manually correct distortion in the horizontal and vertical directions
independently.
• Quick Corner
Manually correct the four corners independently.
a
When you correct keystone distortion, the projected image may be
reduced.
H/V-Keystone
Manually correct distortion in the horizontal and vertical directions
independently. H/V-Keystone correction is ideal for fine-tuning keystone
distortion.
You can use H/V-Keystone to correct the projected image under the
following conditions.
Correction angle: Approx. 3˚ right and left/Approx. 3˚ up and down
Fine tune H/V-keystone correction: Up to ±6
a
Press the [w] or [v] buttons on the control panel during
projection to display the Keystone screen.
b
Press the following buttons to correct keystone distortion.
Press the [
w] or [v] buttons to correct vertical distortion.
Adjusting Projected Images
51
To Next Page
Loading...
