When the projector is connected to a computer, you can operate the
computer from the projected screen.
• Using the Easy Interactive Pen, you can perform mouse operations such
as clicking, right-clicking, or dragging and dropping.
Click
Tap the pen tip to the projected screen.
Right Click
Hold the pen tip to the screen for a few seconds, and then
move it away.
Drag and drop
Hold the pen tip to the icon and so on that you want to move,
and then drag the pen tip on the projected screen to the
location you want to move to, and then remove the pen tip
from the projected screen.
s
"Easy Interactive Pen" p.20
• You can swap Right Click and Left Click in Advanced - Pen Tip
Button.
• You cannot draw while using PC Interactive.
• You can easily switch between PC Interactive and PC Free
Annotation.
s "Changing to PC Interactive" p.86
a
When connected to the network, you can perform the following
operations.
• By using the Easy Interactive Pen you can perform mouse operations
for the computer over a network
• Project images from a projector that is operating in another
conference room, and share screens across multiple projectors
• By using the Easy Interactive Pen, you can draw on projected
screens that are being shared by other projectors (you need
dedicated drawing software)
s "Using the Interactive Function over a Network" p.118
Preparing the Projector
You need to make the following preparations in advance to use the PC
Interactive function.
You also need to perform the following operations when using the supplied
software Easy Interactive Tools.
a
Projects images from the computer.
a
For Mac OS X, you need to install Easy Interactive Driver on
the computer.
s
"Install Easy Interactive Driver (Mac OS X only)" p.85
b
Connect the projector to the computer using a USB cable.
See the following when using the Control Pad.
s "Connecting when using the PC Interactive function" p.41
Operating a Computer from the Projected Screen (PC Interactive)
84
To Next Page
Loading...
