Epson EB-1410Wi - Changing to PC Interactive

Amount of Memo‐
ry
256 MB or more
Recommended: 512 MB or more
Hard Disk Space
100 MB or more
Display
Resolutions no lower than XGA (1024 x 768) and no higher
than WUXGA (1920 x 1200)
Display color of 16-bit color or greater
Installing
a
You can skip the following procedure if you installed Easy Interactive
Tools using the Easy Install option as this already installs the Easy
Interactive Driver.
s Easy Interactive Tools Ver.2.1 Operation Guide
a
Turn on your computer.
b
Insert the "EPSON Projector Software for Easy Interactive Function"
CD-ROM into your computer.
c
Double-click the Install Navi icon in the EPSON window.
d
Select Custom Install, and then follow the on-screen instructions
to install.
e
Restart the computer.
Changing to PC Interactive
You can change between the PC Free Annotation and PC Interactive using
one of the following methods.
• Press the [Pen Mode] button on the remote control
• Press the Pen Mode icon on the projected screen using the Easy
Interactive Pen
To change from PC Free Annotation to PC Interactive, press [
] and
then select [
].
To change from PC Interactive to PC Free Annotation, press [ ] and
then select [
].
Operating a Computer from the Projected Screen (PC Interactive)
86