Saving
You can save the projected screen on a USB storage device or a network
folder.
The functions and procedures differ for Whiteboard Mode and PC Free
Annotation. You can make more detailed settings in Whiteboard Mode.
Attention
If you are using a multi-card reader or USB hub, operations may not be
performed correctly. Connect directly to the projector or the Control Pad.
a
You may not be able to use USB storage devices that incorporate
security functions.
For Whiteboard Mode
You can save in the following file formats.
• PNG (Resolution: 1280 x 800)
• PDF (set a password if necessary)
a
Press the [Save] button on the Control Pad or the remote control.
a
You can also save from [ ] on the bottom toolbar.
b
Make necessary settings on the Save screen displayed.
Item Explanation
File Name
Enter the file name. Click the text box to display the soft
keyboard, and then enter the file name.
Range
Set the range of pages that you want to save. You cannot select All
if the save format is PNG.
Location
When pressed, a dialog box is displayed allowing you to select the
folder in which to save the image.
Save Format
Select the save format (PDF or PNG). For PDFs, you can set
whether or not to encrypt the file. Enter a password when you
want to encrypt the file.
c
Click Save.
Attention
• When you enter the password, it is displayed on the screen.
• When encrypting a file, make sure you do not forget the password.
For PC Free Annotation
You can save in PNG format. The save location is the location set on the
Whiteboard settings screen from the Configuration menu. An error occurs
if you cannot use the set location. Also, the file name is set automatically.
Using Drawing Content
80
To Next Page
Loading...
