Reset menu
Resets all of the network settings.
Sub-menu Function
Reset network
settings.
To reset all of the Network settings, select Yes.
When you reset the network settings , the Passphrase,
Administrator Password and Manage Certificates menu settings
change back to their default values, and the certificates are
deleted.
After you reset all the settings, the Basic menu appears.
Info Menu (Display Only)
Lets you check the status of the image signals being projected and the status
of the projector. Items that can be displayed vary depending on the source
currently being projected. Depending on the model used, some input
sources are not supported.
s "Automatically Detect Input Signals and Change the Projected Image
(Source Search)" p.47
Sub-menu Function
Lamp Hours
You can display the cumulative lamp operating time
*
.
When it reaches the lamp warning time, the characters are
displayed in yellow.
Source
You can display the source name for the connected
equipment currently being projected.
Input Signal
You can display the content of Input Signal set in the
Signal menu according to the source.
Resolution
You can display the resolution.
Video Signal
You can display the settings for Video Signal in the Signal
menu.
Refresh Rate
You can display the
refresh rate
g
.
Sync Info
You can display the image signal Information.
It may be needed if service is required.
List of Functions
162
To Next Page
Loading...
