Sub-menu Function
Reset
You can reset all adjustment values on the Signal menu to their
default settings, except for Input Signal.
See the following to return all menu items to their default
settings.
s "Reset Menu" p.163
Settings Menu
Sub-menu Function
Keystone
You can correct keystone distortion.
• When H/V-Keystone is selected:
Adjust V-Keystone and H-Keystone to correct horizontal
and vertical keystone distortion.
• When Quick Corner is selected:
Select and correct the four corners of the projected image.
s "Quick Corner" p.52
Sub-menu Function
Split Screen
(This item cannot be set when the source is Whiteboard.)
You can split the screen into two screens.
You can change the Screen Size, and select the Source, Swap
Screens, Audio Source, and Exit Split Screen.
s "Projecting Two Images Simultaneously (Split Screen)"
p.90
Zoom
Adjusts the projected image size.
Image Shift
Starts Image Shift.
s "Adjusting the Position of the Image (Image Shift)" p.54
Control Panel
Lock
You can use this to restrict operation of the projector's control
panel.
s "Restricting Operation (Control Panel Lock)" p.115
Pointer Shape
You can select the shape of the pointer.
Pointer 1:
Pointer 2:
Pointer 3:
s "Pointer Function (Pointer)" p.105
Power Consump‐
tion
You can set the lamp brightness to one of two settings.
Select ECO if the images being projected are too bright, such as
when projecting images in a dark room or onto a small screen.
When ECO is selected, the amount of electricity consumed and
the lamp's operating life are changed as follows, and fan rotation
noise during projection is reduced.
Electrical consumption: Approx. 40% decrease, lamp life:
Approx. 1.4 times longer
Volume
(This item cannot be set when the source is Whiteboard.)
You can adjust the volume. Setting values are saved for each
source.
List of Functions
142
To Next Page
Loading...
