EasyManua.ls Logo

Epson EB-1410Wi - Soft Keyboard Operations; Basic Menu

Epson EB-1410Wi
215 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cancel: Continues displaying the Network menu.
Soft keyboard operations
The Network menu contains items that require input of alphanumerics
during setup. In this case, the following software keyboard is displayed. Use
the [
], [ ], [ ], and [ ] buttons on the remote control or the [
w
],
[
v], [a], and [b] buttons on the control panel to move the cursor to the
desired key, and then press the [
] button to enter the alphanumeric
character. Enter figures by holding down the [Num] button on the remote
control, and pressing the numeric buttons. After inputting, press Finish on
the keyboard to confirm your input. Press Cancel on the keyboard to cancel
your input.
Each time the CAPS key is selected and the [ ] button is pressed, it
switches between upper case and lower case.
Each time the SYM1/2 key is selected and the [
] button is pressed, it
sets and changes the symbol keys for the section enclosed by the frame.
a
By using a Web browser of a computer connected to the projector on
a network, you can set functions and control the projector. This
function is called Web Control. You can easily enter text using a
keyboard to make settings for Web Control such as Security settings.
s "Changing Settings Using a Web Browser (Web Control)" p.122
Basic menu
Sub-menu Function
Projector Name
Displays the projector name used to identify the projector when
connected to a network.
When editing, you can enter up to 16 single-byte alphanumeric
characters.
Web Remote
Password
Set a password to use Web Remote. You can enter up to 8 single-
byte alphanumeric characters.
Web Remote is a computer function that allows you to operate
the projector by using the Web browser on a computer
connected on a network.
s "Changing Settings Using a Web Browser (Web Control)"
p.122
Projector Key‐
word
When set to On, you have to enter the keyword when you try to
connect the projector to a computer via a network. As a result,
you can prevent presentations from being interrupted by
connections from other computers.
Normally this should be set to On.
s EasyMP Network Projection Operation Guide
List of Functions
152

Table of Contents

Related product manuals