Remote Control
Name Function
A
[t] button
Turns the projector power on or off.
s "From Installation to Projection" p.46
B
[Capture] button
Takes a snapshot of the projected screen. After taking the
snapshot, the image is pasted onto a new page in
Whiteboard Mode. (This button cannot be used in
Whiteboard Mode.)
s "Using Drawing Content" p.80
C
[Print] button
Prints the projected screen.
s "Using Drawing Content" p.80
D
Numeric buttons
• Enter the Password.
s "Setting Password Protect" p.113
• Use this button to enter numbers in Network settings
from the Configuration menu.
E
[Auto] button
If pressed while projecting analog RGB signals from the
Computer port, you can automatically optimize Tracking,
Sync., and Position.
F
[Aspect] button
Each time the button is pressed, the aspect mode changes.
s "Changing the Aspect Ratio of the Projected Image"
p.59
G
[Num] button
Hold down this button and press the numeric buttons to
enter passwords and numbers.
s "Setting Password Protect" p.113
H
[Menu] button
Displays and closes the Configuration menu.
s "Using the Configuration Menu" p.136
Part Names and Functions
16
To Next Page
Loading...
