Extended Menu
Sub-menu Function
Easy Interactive
Function
Allows you to use and set the interactive function.
s "Summary of the Interactive Function" p.63
See the following table for more details.
s "Easy Interactive Function setting items" p.146
Whiteboard Set‐
tings
Sets Whiteboard Mode.
s "Whiteboard Settings screen" p.147
Sub-menu Function
Display
You can make settings related to the projector's display.
Messages: When set to Off, the following items will not be
displayed.
Item names when the Source, Color Mode, or Aspect Ratio
is changed, messages when no signal is being input, and
warnings such as High Temp Warning.
Display Background
*1
: You can set the screen status for
when no image signal is available to Black, Blue, or
Logo.
Startup Screen
*1
: Set to On to display the User's Logo
when projection starts.
A/V Mute
*1
: You can set the screen displayed when the
remote control's [A/V Mute] button is pressed to Black,
Blue, or Logo.
Pen Toolbar Tab: Set whether or not the toolbar tab is
always displayed when using PC Free Annotation.
Pen Mode Icon: Set the display position for the pen mode
icon when using the interactive function. The icon is hidden
when set to Off.
User's Logo
*1
You can change the user's logo that is displayed as a
background during Display Background, A/V Mute, and so
on.
s "Saving a User's Logo" p.109
Projection
Select from one of the following projection methods
depending on how the projector is installed.
Front, Front/Upside Down, Rear, and Rear/Upside Down
You can change the Projection setting as follows by holding
down the [A/V Mute] button on the remote control for
about five seconds.
Front
W
Front/Upside Down
RearWRear/Upside Down
s "Installation Methods" p.27
List of Functions
144
To Next Page
Loading...
