Name Function
C
Battery indicator
Indicates the remaining battery power when the power is
turned on.
• Turns green for several seconds when the battery is
charged.
• Flashes green for several seconds when the battery is
low.
• Does not light when the battery is exhausted. Change
the battery.
s "Replacing the battery for the Easy Interactive Pen"
p.21
D
Slide switch
Switches the Easy Interactive Pen on and off.
When turned on, it takes a few seconds before the Easy
Interactive Pen is operational.
E
Battery cover
Open this cover when replacing the battery.
s "Replacing the battery for the Easy Interactive Pen"
p.21
a
The Easy Interactive Pen will turn off automatically if it is unused for
a long time.
Turn the Easy Interactive Pen on again with the slide switch to use the
pen.
Replacing the battery for the Easy Interactive Pen
The battery indicator on the Easy Interactive Pen lights or flashes when the
power is turned on. Does not light or flash when the battery is exhausted.
When the indicator no longer lights or flashes, replace the battery. Use one
of the following types of battery. Other chargeable batteries cannot be
used.
• AA size manganese battery
• AA size alkaline manganese battery
• SANYO eneloop
®
*
(HR-3UTG/HR-3UTGA/HR-3UTGB)
Attention
Make sure you read the following manual before handling batteries.
s Safety Instructions
a
Remove the battery cover.
While pushing the battery cover catch, lift the cover up.
b
Replace the old battery with a new battery.
Caution
Check the positions of the (+) and (-) marks inside the battery holder to
ensure the battery is inserted the correct way.
c
Replace the battery cover.
Press the battery cover until it clicks into place.
Part Names and Functions
21
To Next Page
Loading...
