The projected images will appear as shown below after setting the screen
size.
Equal Larger Left
Larger Right
a
• You cannot enlarge both the left screen and right screen images at
the same time.
• When one image is enlarged, the other image is reduced.
• Depending on the video signals that are input, the images on the left
and right may not appear to be the same size even if Equal is
set.
Ending the split screen
Press the [Esc] button to end split screen.
The following steps can also be used to end the split screen.
• Press the [Split] button on the remote control.
• Select Exit Split Screen from the configuration menu.
s Settings - Split Screen - Split Screen Setup p.142
When using the interactive function
You can use the following interactive functions during split screen
projection.
• PC Free Annotation
• PC Interactive
• Interactive functions over a network
Whiteboard Mode is not supported.
s "Interactive Function" p.62
Using PC Free Annotation
Set the whole screen as the target for PC Free Annotation.
You can use all input sources except for Whiteboard.
In the following example, we will make settings for the screen on the right.
You can set the screen on the left in the same way.
Projection Functions
93
To Next Page
Loading...
