a
Display the Split Screen Setup screen.
s "Projecting on a split screen" p.91
b
Set Screen Right as the Target Pen Mode.
c
In Source, set the source that you want to use for the screen on
the right.
d
Set the Pen Mode for the source set in step 3 as PC Free
Annotation.
Using PC Interactive
Set one of the split screens as the target for PC Interactive.
The available sources are Computer, DisplayPort, HDMI, USB Display, and
LAN.
In the following example, we will make settings for the screen on the right.
You can set the screen on the left in the same way.
a
Display the Split Screen Setup screen.
s
"Projecting on a split screen" p.91
b
Set Screen Right as the Target Pen Mode.
c
In Source, set the source that you want to use for the screen on
the right.
d
Set the Pen Mode for the source set in step 3 as PC
Interactive.
Using the interactive function over a network
Set one of the split screens as the target for the interactive function.
The available source is LAN.
In the following example, we will make settings for the screen on the right.
You can set the screen on the left in the same way.
a
Display the Split Screen Setup screen.
s "Projecting on a split screen" p.91
b
Set Screen Right as the Target Pen Mode.
c
In Source, set LAN as the source for Screen Right. (You cannot
change Pen Mode.)
Projection Functions
94
To Next Page
Loading...
