a
• If you set Standby Mode to A/V Standby, you can output images to an external monitor even if the projector is in standby mode. You can also output audio to
an external speaker. Audio input from DisplayPort, HDMI, USB Display, USB1, USB2, or LAN cannot be output.
s Extended - Standby Mode p.144
• Only analog RGB signals from the Computer port can be output to an external monitor. You cannot output signals input from other ports or component video
signals.
• Setting gauges for functions such as Keystone, Configuration menu, or Help screens are not output to the external monitor.
• When the audio cable jack is inserted into the Audio Out port, audio stops being output from the projector's built-in speakers and switches to external
output.
Connecting Equipment
38
To Next Page
Loading...
