• Other files or folders are displayed as icons as shown in the following
table.
Icon File Icon File
FSE files
*
MPEG files
SIT files
*
WMV files
JPEG files
*
PFX files
(Client Certificate/Web
Server Certificate)
BMP files P12 files
(Client Certificate/Web
Server Certificate)
GIF files CER files
(CA certificate)
PNG files DER files
(CA certificate)
AVI (Motion JPEG) files
*
PEM files
(CA certificate)
PDF files
*
* When it cannot be displayed as a thumbnail, it is displayed as an icon.
a
• When AutoRun is set for a scenario, it is automatically played back
with the highest priority over other input sources. To stop playback,
press the [Esc] button on the remote control.
s "Operations while playing a scenario" p.103
• You can also insert a memory card into a USB card reader and then
connect the reader to the projector. However, some commercially
available USB card readers may not be compatible with the
projector.
• If the following screen (Select Drive screen) is displayed, press the
[
], [ ], [ ], or [ ] button to select the drive you want to
use, and then press the [
] button.
• You can display the Select Drive screen by positioning the cursor on
Select Drive at the top of the file list screen, and then press the
[
] button.
• The projector can recognize up to eight media at a time.
Projecting images
a
Use the [ ], [ ], [ ], and [ ] buttons to select the file or
folder you want to project.
Projection Functions
98
To Next Page
Loading...
