Epson L18050 Series - The Position, Size, or Margins of the Printout Are Incorrect; Printed Characters Are Incorrect or Garbled

Aspect ratio of the image data and the paper size is dierent.
Solutions
If the aspect ratio of the image data and the paper size is dierent, the long side of the image is cropped if
it extends beyond the long side of the paper.
The Position, Size, or Margins of the Printout Are Incorrect
e
following causes can be considered.
The paper is loaded incorrectly.
Solutions
Load paper in the correct direction, and slide the edge guide against the edge of the paper.
& “Loading Paper in the Rear Paper Feeder” on page 27
The size of the paper is set incorrectly.
Solutions
Select the appropriate paper size setting.
The margin setting in the application software is not within the print area.
Solutions
Adjust the margin setting in the application so that it falls within the printable area.
& “Printable Area” on page 150
Printed Characters Are Incorrect or Garbled
e
following causes can be considered.
Solving Problems > Print Quality is Poor > Print Quality is Poor with Black Ink
116