10. Close the printer cover.
Related Information
& “Ink Bottle Handling Precautions” on page 123
& “Ink Bottle Codes” on page 145
It is Time to Replace the Maintenance Box
Maintenance Box Handling Precautions
Read the following instructions before replacing the maintenance box.
❏ Do not touch the green chip on the side of the maintenance box. Doing so may prevent normal operation and
printing.
❏ Do not replace the maintenance box during printing; otherwise, ink may leak.
❏ Do not remove the maintenance box and open its cover except when replacing the maintenance box; otherwise
ink may leak.
❏ Do not reuse a maintenance box which has been removed and le detached for a long period. Ink inside the box
will have solidied and no more ink can be absorbed.
❏ Do not tilt the used maintenance box until
aer
it is sealed in the plastic bag; otherwise ink may leak.
❏ Do not store the maintenance box in high or freezing temperatures.
❏ Keep the maintenance box out of direct sunlight.
❏ Do not drop the maintenance box or subject it to strong shocks.
❏ Do not touch the openings in the maintenance box as you may get smeared with ink.
Replacing a Maintenance Box
In some print cycles a very small amount of surplus ink may be collected in the maintenance box. To prevent ink
leakage from the maintenance box, the printer is designed to stop printing when the absorbing capacity of the
maintenance box has reached its limit. Whether and how
oen
this is required will vary according to the number
of pages you print, the type of material that you print and the number of cleaning cycles that the printer performs.
Solving Problems
>
It is Time to Replace the Maintenance Box
>
Replacing a Maintenance Box
129
To Next Page
Loading...
Need help?
General
