5. Dampen a so cloth with water, wring it out thoroughly, and then wipe the rubber part of the roller in one
direction.
c
Important:
Do not touch the rubber part on the pickup roller.
6. Press the tab on the right side, and then align the protruding parts with the holes to attach it.
7. Close the printer cover.
8. Connect the power cord.
9. Press the
P
button to turn on the printer.
If the problem is not solved, replace the pickup roller.
Related Information
& “It is Time to Replace the Pickup Rollers” on page 132
Maintaining the Printer
>
Cleaning the Paper Path for Paper Feeding Problems
61
To Next Page
Loading...
