❏ Light for checking smears
c
Important:
Do not use cleaning liquid other than water with a few drops of detergent.
1. Turn o the printer by pressing the
P
button.
2. Open the printer cover.
3. Check if the translucent lm is smeared. Smears are easier to see if you use a light.
If there are smears (such as
nger
marks or grease) on the translucent
lm
(A), go to the next step.
A: Translucent lm
B: Rail
Maintaining the Printer
>
Improving Print Quality
>
Cleaning the Translucent Film
68
To Next Page
Loading...
