Epson SC-F9200 series - Page 264

SC-F9200 Series Revision C
ADJUSTMENT Overview 264
SE Group Confidential (Related Staff Only)
Ink supply
related parts/
units
Pump Cap Unit
Replacement 1 Replacement ---
√ √
p. 170,
p. 177
After
replacement
2 Turn the power on in Serviceman mode. ---
√√
3 Reset the unit counter.
√√
--- p. 293
4 Main Unit Measurement & Automatic Adjustment
√√√
p. 356
Ink Holder
Before
replacement
1 Turn the power on in Serviceman mode. ---
√√
2 Reset the Ink Holder counter.
√√
--- p. 293
3 Turn the power off. ---
√
---
4 Turn the power on in normal mode. ---
√√
5 Dispose of waste ink. ---
√√
6
Reset the waste ink counter.
√
√√
p. 293
7
Activate the ink cartridges for service.
√√√
p. 329
8 Turn the power off. ---
√√
9 Remove the ink tanks. ---
√√
p. 207
10 Lower the lock levers. ---
√√
11 Turn the power on in normal mode. ---
√√
12 Reset the waste ink bottle counter. ---
√√
13 Ink eject
√√√
p. 332
14 Turn the power off. ---
√√
Replacement 15 Replacement ---
√ √
p. 183,
p. 189
Table 4-1. Adjustment items and the order by repaired part
Class
Replaced or Repaired
(Reattached) Part/Unit
Required Operations
Service
Program
Jig Media Replaced Reattached Page