Troubleshooting Page 137
After you install your printer software, you can’t run ScanDisk (Windows 95 and 98)
You see a spooling error message
Possible cause Solution
You cannot use
ScanDisk if Status
Monitor 2 is active.
Disable Status Monitor 2 whenever you want to run ScanDisk. See
Enabling Background Monitoring
for details.
Possible cause Solution
Spooling error
messages or very
slow printing may be
caused by temporary
files.
Change the Spool Manager default spool directory, following the
instructions on Changing the Default Spool Directory
.
Your hard drive is too
full.
Delete unnecessary files to make room on the drive.
Your computer doesn’t
have enough memory
for the file you’re
printing.
Try one of the following:
◗ Reduce the resolution of your image.
◗ Select fewer colors or a lower resolution for your monitor.
◗ Add more memory to your computer.
To Next Page
Loading...
Need help?
General