-10
Safety Instructions
❏
After bringing an ink cartridge inside from a cold storage site,
allow it to warm up at room temperature for at least three
hours before using it.
❏
Store ink cartridges in a cool, dark place.
❏
Do not dismantle the ink cartridges or try to refill them. This
could damage the print head.
Choosing a place for the printer
Observe the following when choosing a place for the printer.
❏
Place the printer on a flat, stable surface that extends beyond
the printer base in all directions. The printer will not operate
properly if it is tilted or at an angle.
❏
Avoid places that are subject to rapid changes in temperature
and humidity. Also, keep the printer away from direct
sunlight, strong light, and heat sources.
❏
Avoid places that are subject to shocks and vibrations.
❏
Leave enough room around the printer to allow for sufficient
ventilation.
❏
Avoid places subject to dust.
❏
Place the printer near a wall outlet where the plug can be
easily unplugged.
Note for French-speaking users:
Placez l’imprimante près d’une prise de contacte où la fiche peut être
débranchée facilement.
To Next Page
Loading...
Need help?
General