Printer Specifications
A-11
EMC:
System Requirements
For Windows computers
To use this printer, you need Microsoft
®
Windows
®
98,
Windows
®
95, Windows
®
3.1, Windows
®
2000 or Windows
NT
®
4.0 installed and a shielded, twisted-pair parallel cable
connected. If you wish to connect your printer to a USB port, you
need a Windows 98 or 2000 pre-installed PC that is equipped with
a USB port and is connected to the printer via a shielded USB
cable.
Your computer should also meet the following system
requirements.
U.S. model FCC part 15 subpart B class B
CSA C108.8 class B
European model Directive 89/336 /EEC
EN 55022 (CISPR Pub. 22) class B
EN 50082-1
IEC 60801-2
IEC 60801-3
IEC 60801-4
EN 61000-3-2
EN 61000-3-3
Australian model AS/NZS 3548 class B
Minimum System Requirements Recommended System
i386/25 MHz for Windows 3.1
i486/25 MHz for Windows 95 and
NT 4.0
i486/66 MHz for Windows 98 and 2000
Pentium or better processor
To Next Page
Loading...
Need help?
General