A-12
Printer Specifications
Your computer dealer can help you update your system if it does
not meet these requirements.
For Macintosh computers
To connect this printer to an Apple
®
Macintosh
®
computer, you
must use a USB cable.
Your Macintosh must also meet the following system
requirements.
Note:
❏
The amount of available memory varies according to the number and
kind of applications that are open. To see how much memory is
available, click
About This Computer
on the Apple menu and refer
to the memory size (listed in kilobytes) under “Largest Unused Block”
(1,024K=1 MB).
16 MB RAM 32 MB RAM or more for
Windows 98, 95, and 3.1
64 MB RAM or more for
Windows 2000 and NT 4.0
20 MB hard disk space for Windows
98, 95, and 3.1
40 MB for Windows 2000 and NT 4.0
50 MB or more hard disk
space for Windows 98, 95,
and 3.1
100 MB or more for
Windows 2000 and NT 4.0
VGA monitor VGA monitor or better
Minimum System Requirements Recommended System
Mac OS 8.1
(If using the optional IEEE1394
Interface Card, MacOS 8.6.)
Mac OS 8.5.1 or later
(If using the optional IEEE1394
Interface Card, MacOS 8.6 or
later.)
9MB RAM
9MB RAM when background
printing is turned on.
21 MB RAM or more.
36 MB RAM or more when
background printing is turned on.
To Next Page
Loading...
Need help?
General