Paper Handling
1-7
About special media cleaning sheets
Cleaning sheets that are packaged with EPSON special media
should not be used with this printer. The cleaning function
performed by these sheets is not necessary with this type of
printer and the sheets may jam in the printer.
Loading Envelopes
When printing on envelopes, please note the following:
❏
You can load up to 10 envelopes in the sheet feeder.
Note:
The folding quality and thickness of envelopes varies widely. If the
total thickness of the stack of envelopes exceeds 10 mm, press each
envelope in the stack flat before loading.
❏
Set the adjust lever to the
“
+” position. To do this, open the
printer cover and reposition the lever.
Note:
❏
Return the adjust lever to the “0” position, which is the normal
position, after you finish printing on envelopes. Leaving the
lever in the “+” position may cause gaps to appear in images
that are printed on other media.
❏
When the adjust lever is in the “+” position, make sure that the
High Speed
check box in the printer driver’s Advanced dialog
box is cleared. To clear this check box, you may also need to
change the Print Quality setting.
To Next Page
Loading...
Need help?
General