11-2
Options and Consumable Products
Using optional interface cards
Note the following when using optional interface cards:
❏
To use the Ethernet Interface Card
(C82362
✽
/C82363
✽
/C82364
✽
/C82384
✽
) and IEEE1394
Interface Card(C82372
✽
), see the documentation that comes
with the card for setup information.
Follow these steps to install an optional interface card.
1. Make sure the printer is turned off and all the printer’s lights
are off.
2. Unplug the power cord from the electrical outlet (and from
the back of the printer, if your printer’s power cord is
removable).
c
Caution:
Do not install the interface card when the printer is
connected to an electrical outlet. Doing so may damage the
printer or your computer.
3. Turn the printer around so that its back faces you, and
disconnect any existing interface cables.
To Next Page
Loading...
