10-16
Troubleshooting
❏
Select
Automatic
as the Mode setting on your printer driver’s
Main menu (Windows) or in the Print dialog box (Macintosh).
❏
If the paper is curled toward the printable side, flatten it or
curl it slightly toward the opposite side.
❏
Set the adjust lever to the “+” position, and make sure that the
Media Type setting in your printer driver is correct.
❏
Remove each sheet from the output tray as it is printed,
especially if you are using transparencies.
❏
If you are printing on glossy media or transparencies, place a
support sheet (or a sheet of plain paper) beneath the stack. Or,
load one sheet at a time.
❏
Run the Head Cleaning utility.
❏
Run the Print Head Alignment utility.
❏
Ink may have leaked inside the printer. Wipe the inside of the
printer with a soft, clean cloth.
w
Warning:
Do not touch the gears inside the printer.
Wipe here
To Next Page
Loading...
Need help?
General