Epson Stylus Color 980 User Manual

Using the Printer Software for Windows
3-49
2. Double-click the
System
icon, then click the
Device
Manager
tab.
3. Double-click the
Ports (COM & LPT)
icon and then
LPT1
. If
you have connected your printer to a port other than LPT1,
double-click the appropriate port icon.
4. Click the
Resources
tab, then clear the
Use automatic
settings
check box. Write down the Input/Output Range
settings shown in the resource settings box.
5. Select a basic configuration setting from the Setting based on
list that uses the same Input/Output Range settings as those
you wrote down in Step 4, and make sure that the Direct
Memory Access channel and Interrupt Request numbers are
allocated and displayed. Confirm also that the Conflicting
device list box shows
No conflicts
.
6. Click
OK
to save the settings.
7. Reopen the Speed & Progress dialog box to confirm that DMA
transfer has been enabled.

Epson Stylus Color 980 Specifications

General

Brand	Epson
Model	Stylus Color 980
Category	Printer
Language	English