Epson TM-C3400 Reference Guide

Chapter 2 Setup
113
2
Media Position Detection
The following 3 types of media position detection is set on this printer.
This is set from [Media Position Detection] on [Maintenance And Utilities] tab.
The printer's media position detection setting can be checked using Self-test Mode. For details,
see Self-test
Mode on page 198.
• No Detection
Detects paper presence only, and does not adjust the paper position.
• Detect Blackmarks on Die-cut Labels
When using Black Mark Di e-cut Label, adjusts printing position and autocutting position to
the top of the black mark.
• Detect Blackmarks on Continuous Paper
When using Black Mark Receipt, adjusts printing position
and autocutting position to the top
of the black mark.
• Detect Margins Between Labels
When using Die-cut Label, adjusts printing position and autocutting position to the top of the
labels.
The printing is not performed and an error occurs when the printer setting is not matched to
the paper type to use. Make sure to set the setting as following.
Paper type to use
No Detection
Detect
Blackmarks
on Die-cut
Labels
Detect
Blackmarks
on Continu-
ous Paper
Detect Mar-
gins Between
Labels
Roll Media
Receipt
√
———
Full-page Label
√
———
Die-cut Label
———
√
Black Mark
Receipt
——
√
-
Black Mark Die-cut
Label
—
√
—
√
Black Mark
Receipt
(Wrist Band)
——
√
—

Epson TM-C3400 Specifications

General

Brand	Epson
Model	TM-C3400
Category	Printer
Language	English