Epson TM-C3400 Reference Guide

Chapter 1 Product Overview
19
1
Status/Error Indications
The printer status is displayed with combination of lighting and flashing of LEDs.
When an error occurs, you can find out the cause and the remedy from the LED indication for
the error.
LED
Status Remedy
Power Error Ink Paper
———
Power on
—
———
Powering off
Charging ink
Closing roll paper cover
Saving or printing data
—
AID temperature error
The ambient temperature
may be too low or too high.
Make sure that the ambient
temperature between 10°C
and 35°C, turn off the printer
and then turn it back on. (See
"Environmental Conditions" on
page 56.)
Maintenance requirement The printer needs repair.
Unrecoverable nozzle
clogging error
(Missing Dot Acceptable
Print Mode)
This condition occurs when
turning on the printer after a
fatal error resulting from
unrecoverable nozzle
clogging. In this mode,
printing is performed even
with a missing dot. The printer
needs repair. (See "When an
Unrecoverable Missing Dot
Occurs" on page 24.)
Fatal error
1. Turn the power off.
2. Open the roll paper cover
and remove the jammed
paper if any. (See "Removing
Jammed Paper" on page
157.)
3. Turn the power on.
If the same error persists, the
printer needs repair.
Cutter error
—
/ : Lights / : Flashes : Off —: No change

Epson TM-C3400 Specifications

General

Brand	Epson
Model	TM-C3400
Category	Printer
Language	English