Epson TM-C3400 - Connecting the Printer to the Host Computer; For USB Interface Model

68
Connecting the Printer to the Host Computer
For USB Interface Model
Connect the printer to the host computer by the USB cable.
Insert the USB cable to the USB connector on the lower rear of the printer and arrange it as
shown below.
Make sure to put the USB cable through the cable hook as shown in the figure below to prevent
the cable from coming unplugged.
• Do not turn the power on until the printer driver is installed.
• Make sure to use the USB cable included with the printer.
Cable hook: Prevents cable from coming unplugged.