Chapter 1 Product Overview
17
1
Button
FEED button
• Feeds the paper continuously when media position detection is set to “No Detection”.
∗ The paper is fed by 15 mm if FEED button is pressed once.
∗ If the FEED button is held down, the paper is continuously fed until the button is released.
(6 seconds at a maximum)
• Feeds the paper to the print starting position when media position detection is set to “Detects
Black Marks” or “Detects Margins Between Labels”.
CUT button
• Feeds the paper to the first auto cut position on the next page and cuts the paper automatically
when media position detection is set to “No Detection”.
• Feeds the paper to the autocut position by detecting the gap between the black marks or labels
and cuts t
he paper automatically when media position detection is set to “Detects Black
Marks” or “Detects Margins Between Labels”.
Status sheet button (Ethernet interface model only)
Prints status sheet.
It is recommended to use Plain Media Roll paper with the width of 108 mm for printing the
status sheet.
LED
POWER (power) LED: Green
•Lights when the power is on.
•Lights off when the power is off.
•Flashes when the printer is operating (initializing, charging ink, head cleaning, Closing roll
paper cover, or printing) or in an error state.
ERROR (error) LED: Red
•Lights or flashes when the printer is offline.
•Lights off when the printer is normal operation (online).
• The media position detection setting is set on [Maintenance And Utilities] tab on the
printer driver.
• See "Status Sheet Printing (Ethernet interface model only)" on page 200 for the status
sheet.
To Next Page
Loading...
Need help?
General