Epson TM-C3400 Reference Guide

Chapter 1 Product Overview
31
1
Paper Specifications
The following is the type and the size of paper specified for this printer.
When using paper other than specified paper, paper feed accuracy, barcode detection accuracy,
printing quality may be degraded or frequent paper jam may occur.
As for black mark die-cut label (synthetic media label), use paper whose outer edges are
removed only on the right and left.
Do
not use the label paper with synthetic media labels on the paper backing (liner). Depending
on the temperature and humidity, the synthetic media labels and paper backing have different
ratios of expansion and contraction, and this causes the paper to curl. If the paper curls, the
paper may be rubbed by
the print head and become contaminated, or the paper may jam.
Paper type Category Form Width
Receipt
(Continuous paper)
Plain Media
Fine Media
PET Film
Roll paper 30 to 108 mm
{1.18 to 4.25"}
(Paper width)
Black Mark Receipt
(Continuous paper with black marks)
Plain Media
Fine Media
PET Film
Roll paper 30 to 108 mm
{1.18 to 4.25"}
(Paper width)
Black Mark Receipt
(Continuous paper with black marks)
Plain Media
Fine Media
PET Film
Fanfold paper 50 to 108 mm
{1.97 to 4.25"}
(Paper width)
Full-page Label Plain Media Label
Fine Media Label
Synthetic Media Label
Roll paper 25.4 to 108 mm
{1 to 4.25"}
(Label width)
Die-cut Label Plain Media Label
Fine Media Label
Synthetic Media Label
Roll paper 25.4 to 108 mm
{1 to 4.25"}
(Label width)
Black Mark Die-cut Label
(Die-cut label with black marks)
Plain Media Label
Fine Media Label
Synthetic Media Label
Roll paper 25.4 to 108 mm
{1 to 4.25"}
(Label width)
Black Mark Die-cut Label
(Die-cut label with black marks)
Plain Media Label
Fine Media Label
Fanfold paper 46 to 108 mm
{1.81 to 4.25"}
(Label width)
Wrist Band Synthetic Media Roll paper 30 mm {1.18"}
28.6 mm
(Paper width)

Epson TM-C3400 Specifications

General

Brand	Epson
Model	TM-C3400
Category	Printer
Language	English