22
• Economy Mode for Low Print Volume (Void Image Print)
Missing dots check i s performed after printing each page with removing the timer cleaning.
When dot missing (more than neighboring 2 dots missing) is detected, the Void Image Print is
performed at the bottom of the previous page. And aft er the dot missing is resolved by the
a
uto head cleaning, reprinting starts from the corresponding page.
The Void Image is printed in solid black by default; however, other image files can also be
registered.
• Economy Mode for Low Print Volume (Reprint)
Missing dots check i s performed after printing each page with removing the timer cleaning.
When dot missing (more than neighboring 2 dots m
issing) is detected, t he EPSON Status
Monitor 3 is displayed. Select the next operation from [Restart printing] (printing the next
data) and [Reprint] (reprinting after dot missing is resolved by the auto head cleaning).
When customer want to select this mode, do NOT uncheck [Use EPSON Status Monitor 3] of
[Dr
iver Preferences] in [Driver Utilities] tab.
• Anti-missing Read Mode
Does not perform missing dots check after printing each page, but checks missing dots while
not printing.
• Anti-missing Color Mode
Does not perform missing dots check after printing each page, but checks missing dots while
not printing. The condition for preventing missing colors du
e to missing dots is different,
depending on the firmware versions as follows:
Except firmware version AAExxxxx: Prevents missing colors due to missing dots on the condi-
tion with adjoining 2 dots in above and below or 3 dots in all nozzles. Does not perform head
cleaning to missing dots with less
than 2 dots that are not adjoining.
Firmware version AAExxxxx: Prevents missing colors due to missing dots on the condition
with adjoining 3 dots in above and below or 10 dots in all nozzles.
*“x” of firmware version AAExxxxx shows any one alphanumeric character.
To Next Page
Loading...
Need help?
General