226
8
Install the printer driver (the install package) on the client computer, and
make the settings for it.
9
For the USB interface model, install the Printer Setting to the client computer.
10
For the Ethernet interface model, install Printer Setting on a computer that
can access the printer (administrator computer or client computer).
11
Use Printer Setting on a client computer or administrator computer to con-
figure the printer.
12
Set the DIP switches of the printer. (page 77)
Turn off the printer before setting the DIP switches.
13
Load the paper. (page 79)
Set the paper according to the DIP switch setting.
14
Perform a test print.